Xeno, SD2SP2 Micro SD Card Reader & Swiss Disk Kit


gcac048 - Brand New - We are a US Seller so you are assured fast and hassle-free shipping. This kit includes the Xeno chip, the NickDisk swiss boot disk, and the SD2SP2 Micro SD Card Adapter TF Card Reader.

1. The XenoGC is a drive chip for the Nintendo Gamecube which allows you to boot unsigned code such as DVDs, Direct boot of DVD+-RW media, your game backups, as well as bootable homebrew discs. It features region free loading of disks as well. It's installed directly on the disc board and injects patch code into the DVD drive at run time to enable debug commands and read DVD+/-R/RW. The XenoGC version 2.0 provides MultiGame support.(Version 2.0 is displayed as version 1.5) and has a green or orange LED to indicate when the drive was successfully patched. It is compatible with all regions & all versions of the gamecube. It is a excellent modchip for Nintendo GameCube that doesn't require wires to attach, and is soldered directly to the circuitboard. This Xeno Gamecube mod chip has a very unique hardware design that directly interfaces with the serial debug port on the laser unit. It also features two status LEDs that will indicate correct function. Enlarge The XenoGC 2.0 red LED is active when the drive resets and the chip is working doing its job. After the drive has been patched successfully, the XenoGC 2.0 green LED will light up. Please check your install procedure if you only get the red LED, or it doesn't light up at all. NGC XENO GC V2.0 2.0 chip IC For Nintendo Game Cube information. If you are unsure how to perform this mod installation, you can reference places that show video clips (such as YouTube Gamecube Modchips) featuring the step by step processes. It's really a simple job with a soldering iron. We take no responsibility for any improper installations or damages caused by such. Or you can have us install it on your Gamecube. This chip is meant for qualified technicians only. If you really aren't qualified to to install this, we don't recommend you purchase it. See the installation image (above, right - click to enlarge), illustrating where the chip and board solder points are.


  • Direct boot of DVD+-RW media
  • Compatible with all regions & all versions
  • Region free loading
  • Multigame disc support
  • No need to remove mainboard
  • Installation control LEDs
  • Switchable read setting adjustment / error retry
  • Switchable audiofix
  • Selfbooting homebrew linux discs


  • Disable audio fix - Press left shoulder button during disc load.
  • Disable DRE fix - Press right shoulder button during disc load.
  • Force NTSC display mode - Press X button during disc load.
  • Force PAL display mode - Press Y button during disc load.
  • XenoGC Shell (multigame disc loader) - Press START button during disc load

2.This kit also includes a professional micro SD card adapter TF Card Reader for the Nintendo Gamecube System PCB that allows a Micro SD card to be inserted into the serial port 2 of the gamecube. Serial port2 is on the bottom of your gamecube, so you don’t have to have a large ugly SDGecko (or a clone) hanging out the front of your gamecube, taking up a Gamecube Memory card save-cartridge port. SD2SP2 is supported by the latest Extrems' Enhanced mGBA, GBI, and emukidid's Swiss-gc. You can now boot up your NGC games or personal backups from the second serial port via a micro SD card for lag-free full motion video and improved read-access to the serial port adapter. Recent improvements to the SWISS code have allowed the available CPU time on the gamecube console to be better utilized as read-time for the serial ports on the gamecube, this means games load a bit faster and FMV is not jittery and painful to watch. This Gamecube mod SD2SP2 is also compatible with the upcoming GCLoader ODE by Black Dog Tech. his removes the hassle of memory card adapters like SD Gecko / WiiKey SD.

SD CARD IS NOT INCLUDED!. Before purchasing please ensure your NGC model has a Serial Port 2 port installed (the newer Gamecubes did not) and that you are able to launch the latest software above. Please pay attention to the orientation of the board when using, Inside or Outside.

3. This kit also includes the NickDisk Swiss SD Card software DVD Boot Disc for use with the serial port 2 SD2SP2 SD card adapter. NickDisk's Swiss Disc is higher quality than a Swiss disc burned on DVD-R and has greater compatibility with the Gamecube's optical drive laser. You can also update Swiss for free by downloading the newest version of Swiss, and including it on your SD/Micro SD card you use with Swiss. Simply use this NickDisk Swiss Boot Disc to load Swiss and then the updated version of Swiss will be playable from there. With this disk and the SD2SP2 SD card Adapter you can also:

  1. Load Gamecube games from an SD/Micro SD card
  2. Load other homebrew software (Gameboy Interface, GC Memory Manager, emulators, and more)
  3. Force video settings
  4. Load game cheats

Add to Cart:

Current Reviews: 1

This product was added to our catalog on Friday 19 June, 2020.

wabusiness template
Children's Scholarship Fund of Philadelphia