Gamecube Port Number 1 Not Working

Author Topic: Gamecube Port Number 1 Not Working  (Read 36196 times)

Cousin Vinny

  • Newbie
  • *
  • Posts: 8
  • Newcomer
Gamecube Port Number 1 Not Working
« on: September 02, 2012, 09:14:57 PM »

 I hope someone can answer this question. I dropped my gamecube while transporting it to a friend's house to play, and now the number 1 port won't work. The other two posts work fine, just the number 1 port. Can I save some money and fix this myself or will I need to send it to a repair shop?

Russel12

  • Member
  • **
  • Posts: 23
  • Newcomer
Re: Gamecube Port Number 1 Not Working
« Reply #1 on: September 03, 2012, 10:34:03 AM »
Maybe it's your controller. Check the port with another controller first, then you can  replace the port if you still have the problem. I replaced a port one time and found out the hard way that the problem was in the cord of my controller. It worked sometimes and sometimes it didn't.

Cousin Vinny

  • Newbie
  • *
  • Posts: 8
  • Newcomer
Re: Gamecube Port Number 1 Not Working
« Reply #2 on: September 04, 2012, 01:11:37 AM »

 No, I have three controllers and none will work on port 1.

Iam2 Dead

  • Jr. Member
  • **
  • Posts: 62
  • Thank U Very Mush
Re: Gamecube Port Number 1 Not Working
« Reply #3 on: September 04, 2012, 06:36:33 AM »
It's probably your port circuit board. If you dropped the cube, the board is probably cracked or broken. Get a replacement controller port module.